Jaw Crusher for Sale

Jaw crusher for sale refers to the primary crusher that squeezes various hard and soft raw ores to small particles. It is widely applied for crushing rock or ore materials for aggregate production, construction waste recycling and mining construction.

Click here for Price

Toggle Plate Jaw Crusher for Sale

Aimix design a toggle plate in our small stone jaw crusher for sale. You can find it in the following GIF picture. Toggle plate is used for protecting the whole machine if there is any uncrushable materials enters.

What is the Working Principle of Jaw Crusher:

• 1.Small jaw crusher for sale is mainly consisted of two jaw crusher plates:fixed plate and movable plate. It takes advantage of the extrusion and bending force between the two jaw plates to squash the materials.
• 2.When one plate closes to another, the material is crushed. Then the two plates separate and the crushed materials drop out from the discharging gate. After the crushing process, the materials with more than 3 mm particle size will account for 50% of the whole discharging materials.
• 3.Jaw rock crushers have simple structures and work more reliable and can crush tough and hard materials. Therefore, jaw crusher machines are widely applied to mine industry, building industry, silicate and ceramics industry.

Features of Aimix Jaw Crusher for Sale:

• 1. Big crushing proportion makes the particle size of stone materials more even.
• 2. Deep crushing cavity
• 3. With safe lubrication system. It’s convenient to replace equipment units. Therefore, it avoids a mass of maintaining work.
• 4. With simple structures. Operating cost is lower.
• 5. Aimix Machinery lays emphasis on energy conservation. Single machine can save 15% to 30% energy, and the whole system can save double energy.
• 6. The discharging gate can be adjusted to a large scale, which can meet various demands from different users.
• 7. With less noise and dust pollution.
• 8.Applied for the primary crusher in large crushing plant. The particle size of materials can be smashed into three levels: Level I(with 50 mm particle size), Level II(with 25 mm particle size), Level III(with 1-6 mm particle size). And jaw crusher is mainly used for crushing the materials to 50mm.

Jaw Crusher Manufacturer-Aimix Group

• • 1.Aimix offers low jaw crusher price. The jaw crusher machine price depends on many factors. On one hand, diverse materials need respective kinds of crusher machines. On the other hand, crush material can be smashed into varying degrees in accordance with the specific demands and instructions . Hence, you can get the total cost until you tell us what material you want use the jaw crusher to smash and what degree of rock size you want. Then we can give you price with suitable model.
  • 2.Aimix can produce all kinds of crusher machines including hammer crusher, cone crushing machine, impact crushers, mobile crusher.
  • 3.Aimix supports excellent after-sale service. We have built up five offices in Philippines, Indonesia, Malaysia, Pakistan and UZ. Besides, we have also acquired countless local agents in over 56 countries. In the future, Aimix plans to set up more and more overseas offices for the sake of providing better after-sale supports and jaw crusher spare parts or wearing parts for our clients all around the world.
  • 4.Aimix Group small jaw crusher for sale can serve you for longer life life. What is more, Aimix offers 1 year warranty and lifetime free maintenance service.
  • 5.Aimix will give you some wearing parts for free in case you need to replace them in the future.

What Materials Can Aimix Jaw Crusher Machine Smash?

Aimix jaw crushers for sale can smash limestone, granite rocks, pebbles, cobble, basalt, cousntruction waste and so on.

Maintenance Tips for Jaw Crusher for Sale:

• 1.Place the jaw crusher machine in a ventilated position or opend ground for the sake of motor heat dissipation and extending motor life.
• 2.Test the machine before start it.
• 3.Start the machine for 3-5 minutes before feeding materials inside the plates.
• 4.Do not add any materials 5 minutes before shutting down the machine to make sure all the remaining materials are crushed and discharged.
• 5.Forbid feeding any meteal materials.
• 6.Shut down the crusher if there is any abnormal sound.
• 7.Lubricate the bearings regularly.

Parameters:

Model	Feeding Inlet Size(mm)	Maximum feeding particle size(mm)	Production Capacity(t/h)	Mortar Power(kw)	Overall Dimension(mm)	Weight(t)
PE-150×250	150×250	125	1-3	5.5	896×745×935	1
PE-250×400	400×250	200	5-20	15	1430×1310×1340	3
PE-400×600	600×400	350	15-50	30	1700×1732×1653	7
PE-600×900	900×600	480	45-110	55	2290×2206×2370	17
PE-900×1200	900×1200	750	90-220	110	3800×3166×3045	50
PE-500×750	500×750	425	15-65	55	2035×1921×2000	12
PE-750×1060	1060×750	630	105-195	90	2655×2302×3110	29
PEX-250×750	750×250	210	15-30	30	1667×1545×1020	5
PEX-250×1000	1000×250	210	15-50	30	1550×1964×1380	7
PEX-250×1200	1200×250	210	20-60	37	2192×1900×1950	8.5